4 Easy Steps To Flush a Water Heater
Unless you love ice cold showers at your home in St. Charles, IL, you depend on your water heater to reliably do its job. This household item requires annual maintenance to keep it working properly, as mineral deposits collect over time and build up inside. A water heater flush may seem like an intimating task because water, electricity and gas are involved. However, the job is less stressful than it first appears. There are 4 easy steps to improve the efficiency and extend the life of this important appliance.
1. Turn Off Power
First, turn the appliance off to avoid the risk of exposing yourself to gas or electrical shock. For gas, turn the knob at the bottom to the “off” position and shut off the valve on the gas pipe. For electric, shut off the power at the circuit breaker box.
Before you begin flushing, collect a garden hose long enough to lead outside. The alternative is to bring a shorter hose and a large bucket to contain the water. Connect the hose to the drain spigot on your water heater.
3. Drain and Flush
Open the valve to drain the water out of the tank. Run hot water from elsewhere in the house to help it flow. Once the water runs clear, close the valve. Repeat the process if desired.
4. Turn On Water and Power
Turn on the water supply to the appliance with the valve closed. Now, turn the power back on. For gas, turn the knob at the bottom to the “on” position and restart the gas supply. For electric, turn the power on at the circuit box. Remember to turn off the water you left running in the other location. The water should heat up in about 20 minutes.
As a homeowner that loves hot showers in St. Charles, IL, conduct a water heater flush on an annual basis to keep your water heater working efficiently. However, if this appliance reaches the end of its life and causes flooding or water damage, contact a water restoration specialist as soon as possible.
For more on St. Charles click here.